Tektronix Phaser 600 User Manual page 629

Media problems (cont'd.)
Symptom Solution
Frequent media When you feed the media into the printer, do the following:
jams (cont'd.)
Clean the printer's rollers and drum. See
instructions.
To optimize the printer's wide-format design, use cut-sheet media at least
B-size and/or roll media at least 16.5 inches wide for better feed reliability.
Open the top cover and exit cover to check the paper path for any
obstruction.
Align the media with the guide on the printer, so that it feeds evenly and
straight.
As you feed the media into the printer, insert it until it stops against the feed
rollers, making sure it touches all rollers at once.
Feed rollers and paper guides
6 1 2
S
Y M P T O M S A N D S O L U T I O N S
for