Tektronix Phaser 600 User Manual page 465

N O T E
The process of resetting the printer takes a few minutes to complete. You will receive
a message on your screen indicating the connection has been interrupted during the
reset. The connection is re-established after the reset, so you can ignore this
message; click the Continue button.
6 At the prompt Save PostScript output as: you are asked for a file name
for saving printer output. Use either the default name given in the edit box or
type in a new name.
Click Save to send the file to the printer.
7
If no output is returned by the printer, the LaserWriter Utility displays a dialog
8
box; click OK to continue.
4 4 9
R
E S E T T I N G T H E P R I N T E R