Tektronix Phaser 600 User Manual page 692

4 Remove the jammed media.
the drum and rollers for any loose paper and remove it.
If paper extends outside the
exit cover:
Close the exit cover.
Gently and evenly pull the
media out of the exit path.
For all types of media jams, always inspect
OR
If paper does not extend
outside the exit cover:
With the exit cover open,
remove the jammed media.
9480-92
OR
If paper is only visible inside
the top cover:
Pull the back tension blade's
handle toward you and hold it
in that position; this lifts the
blade away from the drum
and releases the jammed
media.
Remove the media by pulling
it out of the printer.
9480-85
6 7 5
C
L E A R I N G A M E D I A J A M
9480-83