Printing Postscript Files - Tektronix Phaser 600 User Manual

Printing PostScript files
Use the PSCRIPT.PS file to change a printer's port to accept only PostScript data.
After you copy this file to a port, the printer expects PostScript files on that port. The
port's language change is persistent across print jobs and across printer power
cycles. To use, send the PSCRIPT.PS file to the printer.
1 Locate the utility files on the Phaser 600 printer's CD-ROM; refer to
the files for instructions.
2 Use one of the following methods to send the PSCRIPT.PS file to the printer:
PC users: Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager.)
Workstation users: Send the file to a printer as you would any
PostScript file.
C
H A N G I N G T H E P R I N T E R
5 2 4
'
S L A N G U A G E M O D E
Installing