Tektronix Phaser 600 User Manual page 514

Macintosh users
1 Refer to Macintosh software
2 Select the appropriate printer in the Chooser.
3 Locate the LaserWriter Utility in the PhaserTools folder on your hard disk, and
double–click its icon to start the application.
4 Choose Download PostScript File from the Utilities menu.
5 Select the Initialize Printer Disks file from the list, then click Open. (This file
was installed in the Printer Utilities folder inside the PhaserTools folder.)
6 At the prompt Save PostScript output as: you are asked for a file name
for saving printer output. Use either the default name given in the edit box or
type a new name.
7 Click Save to send the file to the printer.
8 If no output is returned by the printer, the LaserWriter Utility displays a dialog
box; click OK to continue.
If output is returned by the printer, you won't see this dialog box; check your
hard disk for the file the utility created for the printer's output.
I
N I T I A L I Z I N G A F O R M A T T E D
for instructions on installing the printer's files.
4 9 8
S C S I
H A R D D I S K