Tektronix Phaser 600 User Manual page 462

1 See Installing the utility files
View the PRNTNAME.PS file in a text editor.
2
3 Edit the file to substitute a different printer name for
(My Printer Name) in the /PrinterName line.
N O T E
Some text editors add a carriage return or line feed after the last Control-D character
in a file you are editing. If your computer is connected to the printer through the
parallel port, or the optional serial port, the extra characters will start a new job and
the printer times out after a few minutes. To avoid this, copy the CTRLD.PS file to the
printer after you send the PRNTNAME.PS file; see
the CTRLD.PS file.
4 Use one of the following methods to send the file to the printer:
PC users: Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager.)
Workstation users: Send the file to the printer as you would any
PostScript file.
to locate the printer's utility files.
CTRLD.PS
4 4 6
C
H A N G I N G T H E P R I N T E R
for more information on
'
S N A M E