Tektronix Phaser 600 User Manual page 567

1 Using a lint-free cloth that has been
moistened with 90% pure isopropyl
alcohol and inserted into the cleaning tool
(see Cleaning the paper
"V" opening of the tool over the paper
clamp.
2 Clean the clamp by wiping back and forth
3-4 times with gentle pressure. Clean a
small section at a time and repeat the
process until the entire clamp is clean.
C A U T I O N
The paper clamp is more flexible than the back tension blade; when cleaning the
clamp, do not use as much pressure as in the previous procedure, or you might bend
the clamp. Do not twist the tool when cleaning, or you might bend the clamp or catch
the cloth on the clamp's "cutouts" (
clamp), place the
a
).
5 5 1
O
C C A S I O N A L C L E A N I N G
2
1
a
9480-20