Printing The Startup; Printing The Startup Page From The Front Panel; Printing The Startup Page With Phaserlink Software - Tektronix Phaser 600 User Manual

Wide-format color printer

Hide thumbs Also See for Phaser 600:

Table of Contents

Printing the startup page

By default, printing of the startup page is enabled on power up. However, you can

print the startup page anytime you need information on the number of pages that

have been printed, the amount of installed memory, the number of fonts in memory,

and installed interface ports.

Use the following methods to print a copy of the printer's startup page without

turning the printer off and on.

If the printer detects a non-fatal failure, it automatically prints a startup page

containing diagnostic information regardless of the startup page setting.

There are several ways to print the startup page:

Printing the startup page with a downloadable utility ﬁle

R I N T I N G T H E S T A R T U P P A G E