Tektronix Phaser 600 User Manual page 73

Setting up the drivers for Windows 3.1 (cont'd.)
Tektronix driver
4. Return to
Installing printer software for
to perform Step
Windows
and Step 8 of the installation procedure.
Then go on to Step
procedure, below.
In the Control Panel, double-click Printers.
1.
2. Select the Tektronix Phaser 600 printer you installed in the above procedure;
click Connect.
3. Select the port the printer is connected to; click OK.
7
1 of the next
End
Adobe PostScript driver
5. Select your printer and click Install:
Tektronix Phaser 600
(standard configuration)
Tektronix Phaser 600 - Extended
(Extended Features option)
Press and hold down the front panel's
Note
button for configuration information.
6. Click OK; click Close; click OK.
See the Adobe PostScript Printer Driver
Note
User Guide on the printer's CD-ROM
( USRGUIDE.PDF ) for detailed information
on the AdobePS 3 driver.
5 7
P C / W
I N D O W S S O F T W A R E