Tektronix Phaser 600 User Manual page 666

Using the PC/workstation Setscreen utility file
1 Follow the instructions in
either the Phaser 600 CD-ROM or the Printer Software for Windows diskette.
2 Locate the installed files in the PHSR600 subdirectory, inside the PHSRTOOL
directory on your hard disk.
3 Use one of the following files:
Select SCREENON.PS to enable setscreen operations.
Select SCRENOFF.PS to disable setscreen operations.
4 Use one of the following methods to send a file to the printer:
PC users:
Windows 3.1 File Manager, to send the file to the printer.
Workstation users:
PostScript file.
PC/Windows software
Use the DOS COPY command, or the Copy command in
Send the file to the printer as you would any
P
R I N T E D C O L O R S A R E N O T W H A T Y O U E X P E C T E D
to install the utility files from
6 4 9