Tektronix Phaser 600 User Manual page 193

3 Close the paper roll cover.
4 Lower the top cover latch.
5 Orient the media so that the print
side is facing up .
6 To avoid fingerprints and smears,
hold the media by its outer edges
and feed it over the top of the closed
paper roll cover.
7 Align the media's right-hand
edge with the guide line on
the printer. Insert the media
until it stops, plus a little
more to make it buckle
slightly. This ensures an
even pressure and reduces
the chance of media
skewing. The printer picks
the media in approximately
one second.
2
6
1 7 7
A
L L A B O U T M E D I A
4
3
9480-141
7
9480-102