How Commands Are Explained; Background Information (Optional); Command Input Values (Optional); Command Summary - ZyXEL Communications ZYWALL USG Series Reference Manual

Chapter 1 Command Line Interface

1.4 How Commands Are Explained

Each chapter explains the commands for one keyword. The chapters are divided into the following
sections.

1.4.1 Background Information (Optional)

Note: See the User's Guide for background information about most features.
This section provides background information about features that you cannot configure in the web
configurator. In addition, this section identifies related commands in other chapters.

1.4.2 Command Input Values (Optional)

This section lists common input values for the commands for the feature in one or more tables

1.4.3 Command Summary

This section lists the commands for the feature in one or more tables.

1.4.4 Command Examples (Optional)

This section contains any examples for the commands in this feature.

1.4.5 Command Syntax

The following conventions are used in this User's Guide.
• A command or keyword in courier new must be entered literally as shown. Do not abbreviate.
• Values that you need to provide are in italics.
• Required fields that have multiple choices are enclosed in curly brackets
• A range of numbers is enclosed in angle brackets
• Optional fields are enclosed in square brackets
• The symbol means OR.
|
For example, look at the following command to create a TCP/UDP service object.
service-object object-name {tcp | udp} {eq <1..65535> | range <1..65535> <1..65535>}
Enter
1 service-object
Enter the name of the object where you see object-name.
2
Enter or
3 tcp
Finally, do one of the following.
4
• Enter
eq
26
exactly as it appears.
, depending on the service object you want to create.
udp
exactly as it appears, followed by a number between 1 and 65535.
.
<>
.
[]
ZyWALL / USG (ZLD) CLI Reference Guide
.
{}