Table of Contents
Advertisement
CS101-Q370/C246/H310
► Advanced
Network Stack Configuration
This section is used to configure the Network Stack settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Network Stack
[Enabled]
Ipv4 PXE Support
[Disabled]
Ipv6 PXE Support
[Disabled]
PXE boot wait time
0
Media detect count
1
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Network Stack
This section is used to enable or disable UEFI network stack. When Network Stack is enabled,
the following fields will appear.
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be avail-
able.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be avail-
able.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or nu-
meric keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or numeric
keys to set the value.
Chapter 3 - BIOS Setup
Enable/Disable UEFI
Network Stack
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
43
www.dfi.com
Advertisement
Table of Contents
