Table of Contents
Advertisement
CS101-Q370/C246/H310
► Advanced
Trusted Computing
Configure Trusted Computing settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
TPM20 Device Found
Firmware Version:
7.63
Vendor:
IFX
Security Device Support
[Enable]
Pending operation
[None]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Security Device Support
This field is used to enable or disable BIOS support for the security device. A security device
will not be shown on the OS. TCG EFI protocol and INT1A interface will not be available.
Pending operation
Schedule an opeartion for the security device. Your computer will reboot during restart in order
to change state of the security device.
Chapter 3 - BIOS Setup
► Advanced
PTN3460 Configuration
This section configures settings relevant to Trusted Computing innovations.
Enables or Disables
BIOS support for secu-
rity device. O.S will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
PTN3460 Function
Enabled or Disabled PTN3460 LCD Features.
LCD Panel Type
Select the resolution of the LCD Panel — 800X480, 800X600, 1024X768, 1366X768,
1280X1024, 1280X768, 1920X1080, or 1600X900.
LCD Panel Color Depth
Select the color depth of the LCD Panel — 18 Bit, 24 Bit, 36 Bit, 48 Bit.
Backlight Type
Select the inverter polarity and brightness control — Normal+PWM Mdde, Normal+DC Mdde,
Invert+PWM Mdde, or Invert+DC Mdde.
37
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
PTN3460 Function
[Disabled]
LCD Panel Type
[1024X768]
LCD Panel Color Depth
[18 Bit]
Backlight Type
[Normal+PWM Mode]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Important:
The configuration must match the specifications of your LCD Panel in order for the
LCD Panel to display properly.
www.dfi.com
Enabled or Disabled
PTN3460 LCD Features.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Advertisement
Table of Contents
