Table of Contents
Advertisement
CS101-Q370/C246/H310
► Rear Panel I/O Ports
RJ45 LAN Ports
LAN 2
LAN 1
LAN 2
LAN 1
Features
CS101-H310 :
•
Intel
I211AT PCIe
®
•
Intel
I219V PCIe
®
CS101-Q370/C246
•
Intel
I211AT PCIe
®
•
Intel
I219LM PCIe
®
The two LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Chipset menu ("PCH-IO Configuration" submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
Chapter 2 - Hardware Installation
► Rear Panel I/O Ports
USB Ports
USB 2
USB 1
USB 2
USB 1
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The motherboard is equipped with 4 onboard USB Type A ports (USB 1-2/3-4) at the rear
panel I/O ports. The four USB rear ports support USB 3.1 Gen 1 on CS101-H310, and USB 3.1
Gen 2 on CS101-Q370/C246. Two 10-pin USB internal connectors allow you to connect to 4
additional USB 2.0 ports (USB 5-6/7-8).
The additional USB ports may be mounted on a card-edge bracket. Install the card-edge
bracket to an available slot on the system chassis and then insert the USB port cables to a
connector.
BIOS Setting
Configure these onboard USB devices in the Advanced menu ("USB Configuration" submenu)
of the BIOS. Refer to the chapter 3 for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
18
USB 3.1 Gen 1
USB 4
USB 3
▲ CS101-H310
USB 3.1 Gen 2
USB 4
USB 3
▲ CS101-Q370/C246
www.dfi.com
USB 2.0
USB 5-6
USB 7-8
2
10
1
9
Advertisement
Table of Contents
