DFI CS101-C246 User Manual page 65

CS101-Q370/C246/H310
2. Select MEBx Login and press Enter. You will be prompted for a password. The default
password is "admin". Enter the default password in the space provided under Intel(R) ME
Password then press Enter.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
MAIN MENU
MEBx Login
> Intel(R) ME General Settings
Intel(R) AMT <Enabled>
> Intel(R) AMT Configuration
MEBx Exit
Intel(R) ME Password
Intel(R) ME Password
[↑↓] =Move Highlight [Enter] =Select Entry
3. Enter a new password in the space provided under Intel(R) ME New Password then press
Enter. The password must include:
• 8-32 characters
• Strong 7-bit ASCII characters excluding : , and " characters
• At least one digit character (0, 1, ...9)
• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)
• Both lower case and upper case characters
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
MAIN MENU
MEBx Login
> Intel(R) ME General Settings
Intel(R) AMT <Enabled>
> Intel(R) AMT Configuration
MEBx Exit
Intel(R) ME New Password
Intel(R) ME Password
[↑↓] =Move Highlight [Enter] =Select Entry
Chapter 6 - Intel AMT Settings
[Esc] =Exit
[Esc] =Exit
65
4. You will be asked to verify the new password. Enter the same new password in the space
provided under Verify Password then press Enter.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
MAIN MENU
MEBx Login
> Intel(R) ME General Settings
Intel(R) AMT <Enabled>
> Intel(R) AMT Configuration
MEBx Exit
Verify password
Intel(R) ME Password
[↑↓] =Move Highlight [Enter] =Select Entry
5. Select Intel(R) ME General Settings then press Enter.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.40.1433
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
MAIN MENU
> Intel(R) ME General Settings
Intel(R) AMT <Enabled>
> Intel(R) AMT Configuration
MEBx Exit
[↑↓] =Move Highlight [Enter] =Select Entry
www.dfi.com
[Esc] =Exit
[Esc] =Exit