Csm Configuration; Usb Power Control - DFI CS101-C246 User Manual

CS101-Q370/C246/H310
► Advanced

CSM Configuration

This section is used to configure the CSM settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Compatibility Support Module Configuration
CSM Support [Enabled]
Boot option filter [UEFI only]
Option ROM execution
Network [Do not launch]
Storage [UEFI]
Video [UEFI]
Other PCI devices [UEFI]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
CSM Support
This section is used to enable or disable CSM Support. When CSM Support is set to enabled,
several options will appear for configuration.
Boot option filter
This field controls Legacy/UEFI ROMs priority.
Network
This field controls the execution of UEFI and Legacy Network OpROM.
Storage
This field controls the execution of UEFI and Legacy Storage OpROM.
Video
This field controls the execution of UEFI and Legacy Video OpROM.
Other PCI devices
This field determines OpROM execution policy for devices other than Network, Storage or
Video.
Chapter 3 - BIOS Setup
► Advanced

USB Power Control

Configure USB port power voltage.
Enable/Disable CSM
Support.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
USB3_1/2/3/4&USB2_5/6/7/8
Select the power voltage for USB 1-8 — 5V_Dual or 5V.
42
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB3_1/2/3/4&USB2_5/6/7/8
[5V_Dual]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
www.dfi.com
5V_Dual: Support system
wake up from S3/S4 by
USB KB&MS
5V: No support system
wake up from S3/S4 by
USB KB&MS
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit