Nct6116D Super Io Configuration - DFI CS101-C246 User Manual

CS101-Q370/C246/H310
► Advanced

NCT6116D Super IO Configuration

This section is used to configure the I/O functions supported by the onboard Super I/O chip.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
NCT6116D Super IO Configuration
NCT6116D
Super IO Chip
[Second]
WatchDog Timer Unit
SuperIO WatchDog Timer 0
Serial Port 1 Configuration

Serial Port 2 Configuration

Serial Port 3 Configuration

Serial Port 4 Configuration

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
WatchDog Timer Unit
Select WatchDog Timer Unit: Second or Minute.
SuperIO WatchDog Timer
Set SuperIO WatchDog Timer Timeout value. The range is from 0 (disabled) to 255.
► Serial Port 1/2/3/4 Configuration
Configure the parameters of serial port 1 (COM 1) to serial port 4 (COM 4) as detailed later.
Chapter 3 - BIOS Setup
► Advanced
► Serial Port 1/2/3/4 Configuration
WatchDog Timer Unit
Selection
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Serial Port
Enable or disable the serial COM port.
Electrical Interface Mode
Configure the serial mode of the current port — RS232, RS422, RS485. This field is not avail-
able for COM 3 & COM 4 which only support RS232.
38
► NCT6116D Super IO Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Electrical Interface Mode [RS232]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
www.dfi.com
Enable or Disable Serial
Port (COM)
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit