Network Stack Configuration - DFI CS170-Q370 User Manual

Mini-itx industrial motherboard
Hide thumbs Also See for CS170-Q370:
Table of Contents

Advertisement

Chapter 3 - BIOS Settings
CS170-Q370/C246/H310
www.dfi.com
► Advanced

Network Stack Configuration

This section is used to configure the Network Stack settings.
Network Stack
This section is used to enable or disable UEFI network stack. When Network Stack is enabled,
the following fields will appear.
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be avail-
able.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be avail-
able.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or nu-
meric keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or numeric
keys to set the value.
43

Advertisement

Table of Contents
loading

Table of Contents