Network Stack Configuration - DFI RPS310-R680E/Q670E User Manual

Advanced
X

Network Stack Configuration

User's Manual | RPS310-R680E/Q670E
Network Stack
Enable or disable UEFI network stack. The following fields will appear when this field is en-
abled.
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be avail-
able.
Ipv4 HTTP Support
Enable or disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot support will not be
avail-able.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be avail-
able.
Ipv6 HTTP Support
Enable or disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot support will not be
avail-able.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or nu-
meric keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or numeric
keys to set the value.
Chapter 3
BIOS SETTINGS
40