Table of Contents
Advertisement
CS101-Q370/C246/H310
Step 3: Create a RAID Volume
1. Go to the "Advanced" menu of the AMI BIOS and select "Intel(R) Rapid Storage Tech-
nology".
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main
Advanced
Chipset
Security
RC ACPI Settings
CPU Configuration
Power & Performance
PCH-FW Configuration
Trusted Computing
PTN3460 Configuration
NCT6116D Super IO Configuration
NCT6116D HW Monitor
Serial Port Console Redirection
USB Configuration
CSM Configuration
USB Power Control
Network Stack Configuration
Intel(R) Rapid Storage Technology
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
2. The screen displays all available drives. Select "Create RAID volume" to create a RAID
volume".
3. Use the up or down arrow keys to select the RAID level and press <Enter>.
4. Use the up or down arrow keys to scroll through the list of hard drives and press <En-
ter> to select the drive.
5. Press <Enter>.
6. Use the up or down arrow keys to select the strip size and press <Enter>.
7. Enter the volume size and press <Enter>.
8. At the prompt, press <Y> to confirm volume creation.
Chapter 4 - RAID
Boot
Save & Exit
System ACPI Parameters.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Step 4: Install the Intel Rapid Storage Technology Utility
The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows
RAID volume management (create, delete, migrate) from within the operating system. It will
also display useful SATA device and RAID volume information. The user interface, tray icon
service and monitor service allow you to monitor the current status of the RAID volume and/
or SATA drives. It enables enhanced performance and power management for the storage sub-
system.
52
www.dfi.com
Advertisement
Table of Contents
