Advanced
X
USB Power Control
Server CA Configuration
5_Dual: Support system wake up from S3/S4 by USB KB&MS
5V: No support system wake up from S3/S4 by USB KB&MS
User's Manual | CS332-C246/Q370
Advanced
X
Network Stack Configuration
Network Stack
Enable or disable UEFI network stack. The following fields will appear when this field is
en-abled.
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be
avail-able.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be
avail-able.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or
numeric keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or numeric
keys to set the value.
Chapter 3
BIOS SETTINGS
36