CS101-Q370/C246/H310
► Rear Panel I/O Ports
LAN 2 LAN 1
DC-in
USB 3.1 Gen1*4
▲ CS101-H310
LAN 2 LAN 1
DC-in
USB 3.1 Gen2*4
▲ CS101-Q370/C246
The rear panel I/O ports consist of the following:
•
1 DC-in
•
4 USB ports
- CS101-Q370/C246: USB 3.1 Gen 2
- CS101-H310: USB 3.1 Gen 1
•
2 RJ45 LAN ports
•
1 HDMI port
•
2 DP++ ports
Chapter 2 - Hardware Installation
DP++ 2
DP++ 1
HDMI
DP++ 2
DP++ 1
HDMI
17
► Rear Panel I/O Ports
12V DC-in
Coaxial Type
GND +12V
4-pin Vertical Type
1
3
(optional)
2
4
GND
+12V
Connect a DC power cord to this jack. Use a power adapter with 12V DC output voltage. Using
a voltage higher than the recommended one may fail to boot the system or cause damage to
the system board.
Two types of DC-in jacks can be selected during procurement — coaxial (default) and 4-pin
vertical type (optional) as shown below.
www.dfi.com
4-pin Vertical Type (optional)
DC-in (default)