Setting The Camera Link Mode - Dalsa Piranha HS Series User Manual

48

4.4.2 Setting the Camera Link Mode

Purpose:
Syntax:
Syntax Elements:
Notes:
Related Command s
Example:
03-032-20013-03
All manuals and user guides at all-guides.com
Sets the camera's Camera Link con figuration, number of Camera
Link taps and d ata bit d epth. Refer to the tables on the previous
pages to d etermine w hich configurations are valid for your camera
mod el and how this command relates to other camera configuration
command s.
clm m
m
Output mod e to use:
2: Base configuration, 2 taps, 8 bit output
3: Base configuration, 2 taps, 12 bit output
15: Med ium configuration, 4 taps, 8 bit output
16: Med ium configuration, 4 taps, 12 bit output
21: Full configuration, 8 taps, 8 bit ou tput

When you change the Camera Link mod e
camera attempts to maintain the current
(pixels/ sec). If the current throughput is too slow or too fast for
the current Camera Link mod e, the camera w ill automatically
ad just the throughput value and w ill return a w arning message
that a related parameter w as ad justed .

To obtain the current Camera Link mod e, use the command
gcp
or

The bit patterns are d efined by the Teled yne DALSA Camera
Link Road map available at
sot
clm 15
get clm.
Teled yne DALSA application
Piranha HS-xx RoHS User Manual
(clm command ), the
sot
throughput
notes.
Teledyne DALSA