Appendix F: Camera, Frame Grabber Communication; Setting Up Communication Between The Camera And The Frame Grabber - Dalsa Piranha 4 Color P4-CC-04K07T-00-R User Manual

Piranha4 4K Color Camera User's Manual
Appendix F: Camera, Frame
Grabber Communication
Setting Up Communication between the Camera and the Frame
Grabber
Teled yne DALSA Camera Link cameras sup port the GenCP Camera Link stand ard s.
To configure Teled yne DALSA GenCP Camera Link Cameras:
1. Install the Teled yne DALSA frame grabber in the host computer; refer to the hard w are
installation m anu al.
2. Install Sapera LT and the Teled yne DALSA frame grabber d river.
3. Connect the camera to the frame grabber; refer to the camera installation manu al.
4. Pow er up the camera and w ait until the status LED is solid green.
5. Run the Sap era Configuration utility and select the frame grabber serial p ort connected to the
camera. Set Teledyne D ALSA camera detection to Automatic D etection and Baudrate to Auto
D etect & Maximize.
6. If the camera w ill be configured using three-letter text com mand s via a terminal program, such as
H yperTerminal, then set COM port mapping (optional) to an available COM port (e.g. COM2).
Teledyne DALSA
All manuals and user guides at all-guides.com
111
03-032-20180-01