10> Connecting The Interface Unit To A; Counter Unit - Magnescale SR138-025R Instruction Manual

<10> Connecting the interface unit to a counter
unit
When the connection cable must be electrically adjusted for the
SR138R series, see "4. Electrical Adjustment of the Connection
Cable Circuit".
1 Check that the counter unit power is off. Then, connect the
interface unit of the connection cable with the connector 1-3
on the rear panel of counter unit.
Note
Check the scale unit mounting axis and counter unit insertion.
2 Secure the interface unit using the screws. (Tightening
torque: 60 N·cm)
Rear panel of counter unit
Fig. 3-21
Interface unit
(E) 23