Magnescale SQ10 SERIES Instruction Manual

Smart scale

Download this manual

Enlarged version

日本からの輸出時における注意

本製品 ( および技術 ) は輸出令別表第 1 の 16 の項 ( 外為令別表 16 の項 ) に該当します。キャッチオー

ル規制による経済産業省の許可要否につきましては、輸出者様にてご確認ください。

For foreign customers

Note: Th is product (or technology) may be restricted by the government in your country. Please make sure

that end-use, end user and country of destination of this product do not violate your local government

regulation.

45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan

SQ10 Series

2-A01-946-1A

Scale

SQ10

Instruction Manual

Read all the instructions in the manual carefully before use and strictly follow them.

Keep the manual for future references.

Notes

• Take adequate care not to fold or bend the cables when using this product.

• Do not install equipment that generates strong magnetic waves in the vicinity of this product.

• Use this product in an environment having an ambient temperature range of 0 °C to +50 °C and that is not directly exposed

to sunlight or heat sources.

• Avoid touching other scales or other parts of the scale with this product.

• Do not attempt to reinstall this product.

• Make sure that the external magnetic fi eld does not exceed 0.5 mT.

2015.12

Printed in Japan

Series

Page 1 • Avoid touching other scales or other parts of the scale with this product. • Do not attempt to reinstall this product. • Make sure that the external magnetic fi eld does not exceed 0.5 mT. 45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan SQ10 Series 2015.12 2-A01-946-1A Printed in Japan ©2015 Magnescale Co., Ltd.
Page 2 Specifi cations Installation Procedure 6. Affi x the scale while making contact with two or more parallel pins. Using your fi ngers, fi x the scale in place by fi rmly pressing Operating temperature range : 0 to 50 °C Preparation down the 30-mm section of the peeled backing paper.