Magnescale SR138-025R Instruction Manual page 47

■ General precautions
When using Magnescale Co., Ltd. products, observe the following
general precautions along with those given specifically in this
manual to ensure proper use of the products.
• Before and during operations, be sure to check that our products
function properly.
• Provide adequate safety measures to prevent damage in case
our products should develop a malfunction.
• Use outside indicated specifications or purposes and
modification of our products will void any warranty of the
functions and performance as specified for our products.
• When using our products in combination with other equipment,
the functions and performance as noted in this manual may not
be attained, depending upon the operating environmental
conditions. Make a thorough study of the compatibility in
advance.
■ Precautions for use under the following
environments
1 When using water-miscible cutting fluid or when cutting metal or
non-metal (ceramic, glass fiber, etc.) objects.
• Mount the scale unit so that it is not directly exposed to
water-miscible cutting fluid or cutting scraps.
• Attach a scale cover to prevent water-miscible cutting fluid
mist or powder from entering the inside of the scale unit.
2 When mounted on a honing machine or other machine that
slides at high speed for long periods within a specific area.
• Regularly apply oil or spray lubricant (CRC•WD40, etc.).
If using in the environments in 1 or 2, be sure to always implement
the measures above. Quality cannot be guaranteed unless these
measures are implemented.
(E) i