Recording With Other Sources - Tascam DR-1 Quick Start Manual

3–Recording
9 Press the
STOP/HOME
The recorded data is saved as a new audio file
and the Home Screen appears on the display
again.
The playback position is set at the beginning of
the recorded audio file.
NOTE
REC/PAUSE
• Press the
temporarily.
• Audio files recorded on the DR-1 are automatically
given a file name in the format of "DR" followed by
six digits assigned in recording order. A file exten-
sion is added to the end of the file name according
to the file type (.wav or .mp3). For example, if the
first recorded file is WAV type, the file is named
"DR000000.wav."
key to stop recording.
key to pause recording

Recording with other sources

Instead of using the built-in microphone, you can
record using an external microphone or record the
output signal from a mixer, audio device or other
source.
To record a signal other than the built-in micro-
phone, connect the sound source to the appropriate
input jack on this unit. Set the
that sound source on the Input Setting screen
(refer to steps 1–4 of "Recording with the built-in
microphone" above).
All the procedures after making the input setting
are the same as steps 5–9 in "Recording with the
built-in microphone."
item for
INPUT