Contents and general safety instructions
Selecting the power unit
Target group
Service
Festo P.BE−CPEA−CL−EN en 0711a
Warning
In order to provide the electric power supply, use only
·
PELV circuits as per IEC/DIN EN 60204−1 (Protective
Extra−Low Voltage, PELV).
Take into account also the general requirements for
PELV circuits as per IEC/DIN EN 60204−1.
Use only power packs which guarantee reliable
·
electrical isolation of the operating voltage as per
IEC/DIN EN 60204−1.
By the use of PELV power units, protection against electric
shock (protection against direct and indirect contact) is guaran
teed in accordance with IEC/DIN EN 60204−1 (electrical equip
ment of machines, general requirements).
This manual is directed exclusively at technicians trained in
control and automation technology.
Please consult your local Festo repair service if you have any
technical problems.
VII