A.6.4 Connector Sets For Input Module Type Cp−E16−Kl−Cl - Festo CPI-CL Series Manual

A. Technical appendix
A.6.4 Connector sets for input module type CP−E16−KL−CL
Sockets type PS1−SAC31−30POL+LED
Tension spring sockets,
3−row + LED
Festo P.BE−CPEA−CL−EN en 0711a
Recommendation: Use the connector sockets type
PS1−SAC31−30POL+LED for the input module type CP−E16−KL−
CL.
Number
2
Two rows of the three−row connector socket are intended as
distributor boards for the sensor supply. These rows are each
connected internally (see Fig. A/8).
Fasten the sockets with the screws provided. The maxi
·
mum tightening torque is 0.2 Nm.
Recommended
Connection
for connection
cross section
see leaflet X1, X2
with product
A−29