Mounting - Festo CPI-CL Series Manual

5. Output module type CP−A08−M12−EL−Z
5.2

Mounting

Fitting onto a wall
Festo P.BE−CPEA−CL−EN en 0711a
The output module is intended for fitting onto a wall or onto
profiles. Take into account the following dimensions and
weights:
Type
CP−A08−M12−EL−Z
Tab. 5/2: Dimensions of output module
The following diagram shows the dimensions for the holes.
Always fasten each module with 4 screws and a locking disc.
Tightening torque of the fastening screws: 1.2 ± 0.2 Nm.
Fig. 5/2: Installation dimensions of output module
CP−A08−M12−EL−Z
Dimensions
approx. 143 x 104 x 30 mm
approx. 142 mm
Weight
approx. 260 g
5−5