Mounting - Festo CPI-CL Series Manual

4. Input modules type CP−E16−M...−EL and CP−E32−M8−EL
4.2

Mounting

Fitting onto a wall
Festo P.BE−CPEA−CL−EN en 0711a
The input modules are intended for fitting onto a wall or onto
H−rails. Take into account the following dimensions and
weights:
Type
CP−E32−M8−EL
CP−E16−M8−EL
CP−E16−M12−EL
Tab. 4/2: Dimensions of the input module
The following diagram shows the dimensions for the holes.
Always fasten each module with 4 screws and a locking disc.
Tightening torque of the fastening screws: 1.2 ± 0.2 Nm.
Fig. 4/4: Fitting dimensions input module CP−E...−EL
Dimensions
approx. 143 x 104 x 30 mm
approx. 143 x 104 x 30 mm
approx. 143 x 104 x 30 mm
approx. 142 mm
Weight
approx. 260 g
approx. 260 g
approx. 260 g
4−7