A.1.2 Technical Specifications Of The Cl Input Modules - Festo CPI-CL Series Manual

A. Technical appendix

A.1.2 Technical specifications of the CL input modules

Technical specifications
General technical data
Protection class as per EN 60 529; plug con
nector inserted or fitted with protective cap
Digital inputs
Configuration
Logic level:
1−signal
0−signal
Current consumption (at 24 V)
(input current from sensor to input)
Response delay (at 24 V)
Sensor voltage supply
Nominal value
Tolerance
Internal current consumption of the elec
tronics via the CP connection (all inputs in
0−status)
Load capacity
Electrical isolation
Tab. A/2: Technical specifications type CP−E08−M12−CL and type CP−E08−M8−CL
A−4
Type CP−E08−M12−CL, type CP−E08−M8−CL
See section A.1.1
IP65/IP67
8 inputs per IEC 1131−2 type 2,
24 V DC, positive−switching (PNP)
> 11 V
< 5 V
At logical 1"
Typ. 8 mA
Typical 3 ms
Via the CP connection
24 V DC
See manual for CP master
< 35 mA
Sum > 0.8 A (electronic short−circuit protection)
None
Festo P.BE−CPEA−CL−EN en 0711a