A.1 Technical Specifications - Festo CPI-CL Series Manual

A. Technical appendix
A.1 Technical specifications
A.1.1 General technical data
General technical specifications of the CPI/CP I/O modules
Temperature range:
Operation
Storage/transport
Relative air humidity
Protection against electric shock as per
EN 60204−1/IEC 204 (protection against
direct and indirect contact)
Electromagnetic compatibility
Interference emission
Interference immunity
Vibration and shock
Vibration
Shock
Tab. A/1: Technical specifications of CP I/O modules (general)
Festo P.BE−CPEA−CL−EN en 0711a
o o
−5 C ... +50 C
o o
−20 C ... +70 C
95 %, non−condensing
Via connection to a PELV (Protected Extra−Low
Voltage) power supply unit
See declaration of conformity
è www.festo.com
Tested as per DIN/IEC 68/EN 60068 part 2−6;
0.35 mm path at 10 ... 60 Hz;
5 g acceleration at 60 ... 150 Hz
Tested as per DIN/IEC 68/EN 60068 part 2−27;
±30 g at 11 ms duration; 5 shocks in each direction
A−3