A. Technical appendix
A.1.4 Technical specifications of the EL input modules
Technical specifications
General technical data
Protection class as per EN 60 529; plug con
nector inserted or fitted with protective cap
Digital inputs
Configuration
Logic level:
1−signal
0−signal
Current consumption (at 24 V) (input cur
rent from sensor to input)
Response delay (at 24 V)
Sensor voltage supply
Nominal value
Tolerance
Internal current consumption of the elec
tronics via the CP connection (all inputs in
0−status)
Load capacity
Electrical isolation
Tab. A/5: Technical data type CP−E32−M8−EL
Festo P.BE−CPEA−CL−EN en 0711a
Type CP−E32−M8−EL
See section A.1.1
IP65
32 inputs per IEC 1131−2 type 2,
24 V DC, positive−switching (PNP)
> 11 V
< 5 V
At logical 1"
Typ. 8 mA
Typ. 3 ms, can be parametrised: 0.5 ms, 3 ms, 10 ms,
20 ms
Via the CP connection
24 V DC
See manual for CP master (20.4 V ... 26.4 V)
Max. 75 mA at 24 V
Total max. 1.35 A / 500 mF (electronic short−circuit
protection)
None
A−7