Table of Contents
Advertisement
2-6
SECTION 2 – OPERATION
Schedule Screen
Open the Schedule Editor by tapping the Schedule Navigation Button. When the Schedule
Editor is opened, the current schedule is read from the controller and displayed as shown
below.
Execution Controls
Edit Controls
Controller
Selection
Segment Selection
Step Controls
Execution Controls
These buttons allow the user to Run and Stop the current schedule. If the button is read, that
action is currently active. If the button is black, that action is available. If the button is grey,
that action is unavailable.
Note: When the run button is first clicked, the currently displayed schedule is first sent to the
controller and then the schedule is started.
Edit Controls
New: Discard the currently displayed schedule (the user is prompted to save) and load a
default schedule.
Open: Load a previously saved schedule.
Save: Save the currently displayed schedule to a file.
Upload: Send the currently displayed schedule to the controller.
Download: Read the schedule from the controller (the user is prompted to save).
Controller Selection: Select a Controller to populate the Step Selection list.
Step Selection List: Select a Step to populate the Step Controls list
Step Controls: Edit parameters for the currently selected Step.
+: Insert a blank step after the currently selected Step.
-: Delete the currently selected Step. Schedule Parameters and the End Step cannot be
deleted.
A Schedule consists of 3 types of Steps: Schedule Parameters, Segment List and End Step.
Advertisement
Table of Contents
