Beckhoff EL28 Series Documentation page 41

2.5.6.1 Restore object
Index 1011 Restore default parameters
Index (hex) Name
1011:0
Restore default param-
eters [} 155]
1011:01 SubIndex 001
2.5.6.2 Configuration data
Index 80n0 DIG Safe State Active Ch.n
(n=0 for Ch.1...n=9 for Ch.10; n=A for Ch.11...n=F for Ch.16)
Index (hex) Name
80n0:0 DIG Safe State Active
Ch.1
80n0:01 Active
Index 80n1 DIG Safe State Value Ch.n
(n=0 for Ch.1...n=9 for Ch.10; n=A for Ch.11...n=F for Ch.16)
Index (hex) Name
80n1:0 DIG Safe State Value
Ch.1
80n1:01 Value
2.5.6.3 Command object
Index FB00 DIG Command
Index (hex) Name
FB00:0 DIG Command
FB00:01 Request
FB00:02 Status
FB00:03 Response
EL28xx-xxxx
Meaning
Restore default parameters
If this object is set to "0x64616F6C" in the set value
dialog, all backup objects are reset to their delivery
state.
Meaning
Maximum subindex
Enabling of the output state defined in index 0x80n1:01
in case of a bus error
0: output retains its current state.
1: output is switched to the state defined in index
0x80n1.
Meaning
Maximum subindex
Defines the state of the output in case of a bus error:
0: output off
1: output on
Meaning
Maximum subindex
reserved
reserved
reserved
Version: 2.2
Product overview
Data type Flags Default value
UINT8 RO 0x01 (1
UINT32 RW 0x00000000
(0
dec
Data type Flags Default value
UINT8 RO 0x01 (1
BOOLEAN RW 0x01 (1
Data type Flags Default value
UINT8 RO 0x01 (1
BOOLEAN RW 0x00 (0
Data type Flags Default value
UINT8 RO 0x03 (3
OCTET - RW {0}
STRING[2]
UINT8 RO 0x00 (0
OCTET - RO {0}
STRING[4]
)
dec
)
)
dec
)
dec
)
dec
)
dec
)
dec
)
dec
41