Table of Contents
Advertisement
Safety
Please read this entire manual before installation
and use of this wood burning insert. Failure to follow
these instructions could result in property damage,
bodily injury or even death.
We strongly recommend that smoke detectors be installed.
If smoke detectors have been previously installed, you may
notice that they are operating more frequently. This may be
due to curing of stove paint or fumes caused by accidentally
leaving the fi re door open. Do not disconnect the detectors.
If necessary, relocate them to reduce their sensitivity.
SAFETY NOTICE: If this stove is not properly installed, a
house fi re may result. For your safety, follow the instal-
lation directions. Consult local building or fi re officials
about restrictions and installation inspection require-
ments in your area.
NATIONAL
We recommend that our products be
FIREPLACE
installed and serviced by professionals
INSTITUTE
who are certified in the U.S. by the
National Fireplace Institute (NFI)
or in Canada by Wood
Energy Technical
Training (WETT)
CERTIFIED
www.nficertified.org
Fig. # 1
ALT5.CPINSB 080515-24
Wood Energy
Technical Training
www.wettinc.ca
Mantel or Top Facing
20.5"
2"
Clearances
Masonry or Factory Built Fireplace
The minimum required clearances to surrounding combustible
materials when installed into a masonry or factory built fi replace
are listed below and in fi gure #1.
Minimum Clearances to Combustibles
(Measured From Insert Body)
Adjacent Sidewall .....................20.5 in. (520 mm.)
Mantel .......................................... 16 in. (406 mm.)
Top Facing ................................... 16 in. (406 mm.)
Side Facing (1.5 in. extension) ... 6.5 in. (165 mm.)
CAUTION: Unit hot while in operation. Parts of the appli-
ance, especially the external surfaces, will be hot to touch
when in operation. Keep children, clothing and furniture
away. Contact may cause skins burns.
16"
Fireplace
Hearth
©PACIFIC ENERGY FIREPLACE
PRODUCTS LTD.
6.5"
3
Advertisement
Table of Contents
