Enter Data (Manual Test/Patient Input); Test Report - MES SQA-V Gold User Manual

User Guide Version 3.60 I-button
PATIENT DATA >
PATIENT LIST > then
select a patient record
to view the:
PATIENT DATA SCREEN
in order to:
ENTER DATA, RUN A

TEST REPORT,

VIEW/ATTACH IMAGES
or AUTHORIZE test
results.
Arrows indicate test
results are out of
range.
Click this icon to
export the test report.
!
When test results are
expressed as < or > a
value (low quality
specimens only) this
icon indicates that test
results possibly fall
above or below the
reference range
(Example: Motility <
70% when the
reference is set to
Motility <50%)
Release: 12_APR_2016
Enter Data: Patient Data>Patient
List>Enter Data
Select a test record before clicking the enter
data button. Please note that there can be
more than one test per patient in the data
base.

Click the Enter Data button to input
manual test results and add comments to
the semen analysis record.

Type-in the desired information – only
editable fields will allow entries.

All manual entries are tracked via a
traceability function.

Click the Traceability button at the
bottom of this screen to run a
Traceability Report.
Test Report Patient Data>Patient
List>Test Report
The test report contains test results imported
from the SQA-V AND manual data that is
entered by the user.
Click the Test Report button to view and
print the two-page semen analysis report
(from the patient data screen).

To move between pages, use the page bar
at the bottom of the screen.

Click the printer icon to print a report.

Use the ZOOM to minimize/maximize the
view of the report.

Click the X in the upper right hand corner
of the screen to exit the report.

A yellow arrow will be displayed if the test
results are out of range.

Click the FILE EXPORT icon to export the
report to a .doc file. Enter the path and
file name; then click SAVE.
Enter Manual Test Results
6
Traceability Report