Saving A Caller's Name And Number - Talkswitch TS-600 User Manual

SAVING A CALLER'S NAME AND NUMBER

You can easily save the name and number of a caller while reviewing your call log.
1. When the number and name you wish to store is displayed, press
DIRECTORY
2. Press
3. If you don't wish to change the name of caller, press
this entry.
4. If you wish to change the name of caller, press the
the first character you wish to modify and use the keypad to modify the name.
5. After entering all characters, press
Note about programming phone numbers
• Do not program the outside line access code
The phone automatically inserts it for numbers that are 7 digits or more.
• You can include pauses in the dialing of the number by pressing the
PAUSE
• You can include Flash in the dialing sequence by pressing the
button.
• If your phone is configured for Direct Line Access, the phone will never
insert a line access code
• These tips also apply to programming phone book entries.
W W W.T A L K S W I T C H . CO M
or one of the memory buttons.
button.
9
SAVE
to save this number/name.
.
T S - 6 0 0 U S E R G U I D E
SAVE
again to save
button to move cursor to
9
as part of the number.
SAVE
.
FLASH
1 9