Table of Contents
Advertisement
4. Enter a Hunt Group name. The default name is Hunt Group.
5. Set Line type to multi-branch VoIP or SPn VoIP Service.
6. Select the overflow hunt group. Choices are no overflow and the other activated hunt groups. If you
select an overflow hunt group, ensure it contains different lines than the original hunt group.
ADVANCED VOIP CONFIGURATION
Optionally, perform advanced VoIP configuration.
Setting up caller ID
The VoIP Caller ID area allows you to set up the source for caller ID for outbound VoIP calls. The same
setting is used for the multi-branch profile and all service provider profiles. Extension names are used
by default.
1. Select the VoIP Configuration page.
2. Set the caller ID for outbound VoIP calls.
•
To use the System name from the Administration page, select Use System Name in caller ID
information for all outgoing VoIP calls.
•
To use the First name and Last name from the Local Extension/Fax page set up for each
extension, select Use Extension Names in caller ID information for all outgoing VoIP calls.
2 4
T A L K S W I T C H V O I P N E T W O R K C O N F I G U R A T I O N G U I D E
Advertisement
Table of Contents
Need help?
Do you have a question about the Voip Network and is the answer not in the manual?
Questions and answers