C.4 Updating The Tpu Software - Klein 5000 V2 Series Operation And Maintenance Manual

C-4
APPENDIX C Configuring and Updating the TPU
5. Enter the TPU IP address in the Enter TPU IP Address text box if it is different
than the default address, or click
address is 192.168.0.81. The address will already be displayed if it was
queried or changed as described in "Querying or Changing the TPU IP Address"
on page C-2.
6. Click Edit startup.ini .
Windows Notepad opens with the contents of the startupCdi3000.ini file
displayed.
7. Make the required changes to the startupCdi3000.ini file as required, and then
exit Notepad.
Notepad exits and the changed file is saved. The TPU software restarts and a
window opens confirming the file update:
8. To ensure a clean start with the new update, in about 20 seconds, turn the
TPU off and then on again.

C.4 Updating the TPU Software

Updates to the TPU software are supplied as compressed archive files and must
reside on the SonarPro Workstation or the laptop computer.
To update the TPU software:
1. Connect the supplied Ethernet cable to the LAN connector of the TPU and to
the ETHERNET connector of the SonarPro Workstation.
2. Turn on the SonarPro Workstation and wait for the Windows desktop to appear.
3. Turn on the TPU.
4. Start Linux TPU Updater.
The Klein Linux TPU Updater dialog box opens.
Series 5000 V2 Sonar System Operations and Maintenance Manual
Default Addr if it is the default. The default
P/N 11214512, Rev. 04