Sub-Menu Installation - Danfoss DHP-A Installation Instructions Manual

9.5

Sub-menu INSTALLATION

Table 21. Used for settings that are set during installation.
Menu selection Meaning
SYSTEM
SERVICE TIME
58 – Installation instructions VMBMA1002
Sub menu SERVICE -> INSTALLATION -> SYSTEM:
Note! The menu selection in the SYSTEM menu varies depending on the selected
values. Tip: start in the top menu and work downwards.
Menu selection
HEAT SOURCE
COOLING
POOL
SHUNT GROUP
BUFFER TANK (See sepa-
rate instruction for buffer
tank)
ADDITION
Note! Only used for test operation. The heat
pump counts 60 times as fast, which means that
the waiting times are eliminated during test
operation.
0 = deactivates SERVICE TIME
1 = activates SERVICE TIME, which speeds up the control sys-
tem's integral calculation and start delay by 60 times.
Meaning
GROUND OR ROCK
OUTSIDE AIR
(BRINE SOLUTION, DIRECT EVAP.)
PASSIVE COOLING
( , EXTERNAL, INTEGRATED IN HP)
COOLING A
( , EXTERNAL)
ROOM SENSOR
( , ON)
, ON
, ON
BUFFER TANK
SYSTEM SHUNT
2ND H.C SHUNT
OPTIMUM
( , ON)
HGW
( , ON)
0-10V
( , EXT. AUX. HEATER)
FLOW SENSOR
( , ON)
CURRENT LIMITER
( , ON)
PHASE FAULT
( , PHASE READING)
Factory setting
-