Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Danfoss Manuals
  4. Control Unit
  5. DHP-A
  6. Installation instruction

Danfoss DHP-A Installation Instruction

Outdoor unit
Hide thumbs Also See for DHP-A:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual See also: User Manual, Instruction and Installation Manual
Installation instruction
Outdoor unit
DHP-A, DHP-AL
Contents
1 Installing the outdoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.1 Check the delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.2 Assembling the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.3 Preparing the outdoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.4 Assembling the outdoor unit on the stand . . . . . . . . . . . . . . . . . . .3
1.5 Assembling the front cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
1.6 Assembling the cover and cover plate . . . . . . . . . . . . . . . . . . . . . . .4
1.7 Assembling the defrost sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
VMBMF302

Advertisement

loading

Related Manuals for Danfoss DHP-A

Summary of Contents for Danfoss DHP-A

  • Page 1: Table Of Contents

    Installation instruction Outdoor unit DHP-A, DHP-AL Contents 1 Installing the outdoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.1 Check the delivery .

  • Page 2: Installing The Outdoor Unit

    Installing the outdoor unit It is essential that the outdoor unit is installed by two people. 1 .1 Check the delivery The outdoor unit is delivered as three items: • the outdoor unit, on a wooden pallet • a box containing the stand, adjustable feet and all the necessary screws • a box containing covers The following tools are required for assembly and installation: • Wrench, or equivalent, 10 mm...

  • Page 3: Assembling The Outdoor Unit On The Stand

    1 .4 Assembling the outdoor unit on the stand 7. Lift the outdoor unit into the place on the stand. Figure 2: Lift the outdoor unit onto the stand . 8. Screw the outdoor unit onto the stand. Use 4 x M6x20 screws. It may be necessary to push and pull the stand slightly in order to get the screw holes to align.

  • Page 4: Assembling The Cover And Cover Plate

    14. Secure the upper edge of the front cover. Use 3 x M6x15 torx TX25. Figure 3: Secure the front cover . 15. Remove the transport protection on the four corners of the front panel. Figure 4: Transport protection . 1 .6 Assembling the cover and cover plate 16.
  • Page 5 17. Secure the cover using a screw on each side. Use 2 x cross head screws. If the cover does not align with the side cover plates it may be necessary to drill new Ø 3 mm holes: Mark for the new holes •...

  • Page 6: Assembling The Defrost Sensor

    1 .7 Assembling the defrost sensor Figure 8: Hook the defroster sensor into place . 18. Slide the mounting for the defroster sensor into the hole on the reverse of the outdoor unit until it hooks into place on the edge. 19.

This manual is also suitable for:

Dhp-al