Table of Contents
Advertisement
PROGRAMMING
TTI
The TTI is printed at the top of each page you transmit.
The TTI can have up to 32 characters.
Use" " (space) if you wish to leave a space between two characters.
1
Press the Function key and 2,5 using
the Ten Key Pad.
2
Press the Yes key.
3
Enter characters using * (DEC) or #
(INC).
Press Clear to move the cursor.
Press Yes to complete the entry.
Note:
To delete all the characters, enter a symbol at the first charac-
ter position and press Yes.
CSI
The appears at the other end in the display on the LCD during communication.
Use" " (space) if you wish to leave a space between two characters.
The CSI should be composed of
+ "Country code" "Area code" "Telephone number".
1
Press the Function key and 2,6 using
the Ten Key Pad.
2
Press the Yes key.
3
Enter up to 20 characters with the Ten
Key Pad and * (DEC) or # (INC).
Press Clear to move the cursor.
Press Yes to complete the entry.
Note:
To delete all the characters, enter a symbol at the first charac-
ter position and press Yes.
84
5($'<
6(1'(5 ,'" <1
77, BBBBBBBBBBBB
5($'<
352*7(/"
&6, BBBBBBBBBBBB
<1
Advertisement
Chapters
Table of Contents
