Removing The Cover - Britax Traveller Plus Manual

Cleaning the Traveller Plus

Removing the cover

1
1 . If you are using the head support,
remove it first.
Turn the Traveller Plus on its side. On the
end of each harness strap is a metal tab,
found under the seat and held in place
by the cover elastic. Undo the elastic ties.
3
3 . Fold the chest pad so that the chest clip
is in line with the shoulder strap as shown
above. Then push the chest pad and strap
to the back of the seat through the shoulder
strap slot in the cover and the seat shell.
Repeat from step 1 for the other harness
strap.
5
12
2
1 2
2 . Take hold of one metal tab and turn it
so that the short side will go through the
slot. Push the tab through to the front of
the Traveller Plus.
4
Velcro™ strip
4 . Unfasten the Velcro™ strip at the back
of the Traveller Plus.
5 . Remove the comfort pad from the crotch
strap. Gently pull the cover up, easing the
buckle and adjuster strap through their
slots in the cover.
IMPORTANT
The cover is a safety feature. NEVER use
the Traveller Plus without it
3 4