Setting The Volume - BRAND Transferpette -8 Operating Manual

Setting the Volume

The volume for the Transferpette
volume of the instrument and can be changed quickly and easily.
What to do
1.
Activate volume
setting
2.
Change the volume
Reduce volume
Increase volume
3.
Confirm volume
setting
Important:
By pressing the MENU key any procedure can be cancelled! The display then moves to the next setting or
back to the initial display (depending on actual selection.)
44
-8/-12 electronic is set at the factory to the nominal
®
How to do it
Press one of the arrow keys
to activate volume selection.
‚VOL' blinks.
Press the down arrow key
(-) to reduce the volume.
Holding the arrow key down
accellerates the rate of
change. ‚VOL' continues to
blink.
Press the up arrow key (+)
to increase the volume.
Holding the arrow key down
accellerates the rate of
change. ‚VOL' continues to
blink.
Press the ENTER key.
The display now shows the
new volume setting, in this
case, 102.8 µl in the PIP
mode.
Keys to press Display readout
–
+
1x