The First Steps - BRAND Transferpette -8 Operating Manual

Is everything in the package?
Confirm that your package includes: Transferpette
pipette, battery, power supply unit with battery charging cable,
1 TipBox filled, refill unit, 1 instrument stand, 1 reagent reservoir, silicone
grease, operating manual and 1 set of O-rings made of silicone.
Initializing the Transferpette
1.
Insert the
battery
2.
Activate the
instrument
-8 or -12 electronic
®
-8/-12 electronic
®
a) Open the cover of the battery compartment.
b) Insure that the plug for the battery is firmly
connected to the pipette. Insert the battery.
c) Replace the battery compartment.
The Transferpette -8/-12
®
electronic automatically
requests a reference run
directly after the battery is
inserted. After the pipetting
key is pressed, the refer-
ence run is carried out and
the instrument is now ready
for pipetting.
The display shows the
standard factory setting
(pipetting mode/PIP); and
the nominal volume (for
example, 100.0 µl). Default
aspiration and discharging
speeds are at maximum.
The adjustment of volume
and speed is described on
the following pages.

The First Steps

A
B
C
1x
Pipetting mode
Battery charge
indicator
Up arrow,
indicating
aspiration
Volume setting
43