First Steps; Assembly - BRAND Dispensette III Operating Manual

First Steps

Is everything in the package?
Confirm that your package includes:
Bottle-top dispenser Dispensette
valve and recirculation tube (optional), mounting tool, different bottle adapters, O-ring FKM (for autoclav-
ing), a performance certificate and this operating manual.
Nominal volume, ml
0,5
1, 2, 5, 10
25, 50, 100

Assembly

Warning:
Wear protective clothing, eye protection and gloves! Follow all safety
instructions and observe limitations of use and operating limitations
(page 32-34).
1.
Check sealing
washer(s)
2.
Mounting the
SafetyPrime
recirculation valve
(optional)
3.
Mounting the
Discharge tube
38
, discharge tube, telescoping filling tube, SafetyPrime
®
Adapters
bottle thread, PP
GL 24-25, GL 28/S 28, GL 32-33
GL 24-25, GL 28/S 28, GL 32-33, GL 38, S 40
GL 32-33, GL 38, S 40
Before mounting the SafetyPrime
culation valve or the discharge tube make
sure that the sealing washer is inserted.
Push the SafetyPrime
™
valve approx. 2 mm into the discharge
tube and firmly finger-tighten the locking
nut (Fig. 2). Check the SafetyPrime
recirculation valve for a tight fit.
Push the discharge tube (optional with
SafetyPrime ™
3') approx. 2 mm into the valve block
and firmly finger-tighten the locking nut
(Fig. 3). Check the discharge tube for a
tight fit.
Note:
Recirculation valve and discharge tube
must correspond to the model. Pay
attention to the color code. On the next
day firmly tighten up the locking nut.
™ recir-
™ recirculation
™
recirculation valve, Fig.
™
recirculation
Filling tube
Length, mm
125-240
125-240
170-330
1
2
3
3'